[Welcome] Welcome to Al Dhafra Electronics Co.
Home About Us Contact Us Inquiry Form
 
   
 
 
 
Product Categories
 
Our Products > IT & Networking Accessories > Oscilloscope  
 
IT & Networking Accessories » Oscilloscope » OSCILLOSCOPE 100MHZ 2CH DUAL TRACE  
 
     
   
   
 

Product Name : OSCILLOSCOPE 100MHZ 2CH DUAL TRACE

Art No : OS-5100

  • Descrription

OS-5100 100MHz 2CH Dual Trace

-

6" large size high luminace CRT

-

Wider than specified frequency response

-

Signal delay with delay line useful for ovservation of signal start point

-

ALT. Triggering function(Vert Mode)

-

Auto focusing according to the change of intensity

-

Drift compensation circuit employed in vertical amplifier for low drift

-

Jitterless and high trigger sensitivity

-

TV sync. separation and hold-off circuit useful in video signal ovservation

 

 CRT

Configuration and useful screen

6 inch rectangular screen with internal graticule, 8X10div. (1div = 1cm) marking for measurement of rise time, 2mm subdivisions along the central axis.

Acceleration potential

+10.5kv approx.(ref. Cathode)

 Phosphor

P31

Focusing

provided

Trace rotation

provided

Intensity control

provided

 Z-AXIS INPUT(INTENSITY MODULATION)

Input signal

positive going signal decreases +5Vp-p or more signal cases intensity noticeable modulation at normal intensity setting

Bandwidth

DC to 3.5MHz(-3dB)

Coupling

DC

Input impedance

17~22kΩ typical

Maximum input voltage

20V(DC + peak AC)

 VERRICAL 

 DEFLECTION

DC coupled(-3dB)

DC to 100MHz normal / DC to 20MHz magnified

AC coupled(-3dB)

10Hz to 100MHz normal / 10Hz to 20MHz magnified

Modes

CH1, CH2, ADD, CHOP, ALT

Deflection factor (normal)

2mV/div. to 5V/div. in 11 calibrated steps of 1-2-5

sequence. Continuously variable between steps at least 1:2.5 X 5.

Accuracy

normal ±3%

Input impedance

approx. 1MΩ in parallel with 25pF

Maximum input voltage

direct 250V (DC + peak AC)

Input coupling

AC, GND, DC

Rise time

3.5ns or less (17.5ns or less : 2mV/div.)

CH1 output

20mV/div. into 50Ω / 50Hz to 30MHz(-3dB)

Polarity inversion

CH2 only

Signal delay

delay cable installed  

 HORIZONTAL

 DEFLECTION

Sweep mode

A, A int B, B, B triggered, X-Y

Time base A

0.1㎲/div. to 0.5s/div. in 21 calibrated steps of 1-2-5 sequence

uncalibrated continuous control between steps at least 1:2.5

Hold-off time on time base A

variable with the hold-off control

Time base B

0.1㎲/div. to 10㎲/div. in 7 calibrated steps of 1-2-5 sequence

Delay sweep on time base B

1div. or less / 10 div. or more

Sweep magnification

10 times (max. sweep rate : 10ns/div.)

Accuracy

±3%, ±5%(1:10 probe)  

 TRIGGER SYSTEM

Modes

AUTO, NORM, TV-V, TV-H

Source

INT, LINE, EXT

Coupling

AC

Slope

+ or -

Sensitivity and frequency in AUTO, NORM 30Hz -10MHz

0.48div. in INT / 200mVp-p in EXT

Sensitivity and frequency in AUTO, NORM 10MHz -100MHz

1.5div. in INT / 600mVp-p in EXT

Sensitivity and frequency in ALT trigger 30Hz -10MHz

1.5div. in INT

Sensitivity and frequency in ALT trigger 10MHz -10MHz

1.5div. in INT

Maximum input voltage

250V (DC + AC peak)  

 X-Y OPERATION

Sensitivity

same as vertical deflection for both X-axis(CH1) except accuracy

±5% in X-axis

Frequency and bandwidth

DC to 2MHz (DC coupling) / 10Hz to 2MHz  (AC coupling)

X-Y phase difference

3°or less as DC to 50kHz

 CALIBRATOR

Probe adjustment

approx. 1kHz frequency, 0.5V(±3%) square wave with 50%

duty ratio  

 POWER SUPPLY

Line voltage range

100V(90-110V) with 250V 2A fuse, 120V(108-132V) with

250V 2A fuse, 220V(198-242V) with 250V 1A fuse or 230V(216-250V) with 250V  1A fuse

Line frequency

50/60Hz

Power consumption

approx. 60WOTHERSz  

 PHYSICAL CHARACTERISTICS

Weight

9.6kg

Dimension

320mm(W) X 140mm(H) X 430mm(L)  

 OTHERS

Accessories including

Operation manual, Spare fuse, Power cord

Optional accessories (sold separately)

Probe  

Quantity:  
 
   
 

Our Videos

 
 
 
 
     
     
 
Our Brands
 
 
  Home | About us | Products | Special offers / Promotions | 3D Printers | News & Events | Inquiry Form | Contact Us
Copyright © 2011- 2014 Al Dhafra Electronics Co All rights reserved
Designed & Developed By Tornado