SWITCHING POWER SUPPLY - SINGLE OUTPUT - 35 W - 24 V

  • PRODUCT NAME:

  • SWITCHING POWER SUPPLY - SINGLE OUTPUT - 35 W - 24 V

  • ART NO:

  • APV-35-24

  • Description:

  • Features:
    • Constant voltage mode power supply.
    • Universal AC input / full range.
    • Resists 300 VAC surge input for 5 seconds.
    • Protection against: short circuit / overload / over voltage.
    • Cooling: free air convection.
    • Small and compact size.
    • Fully isolated plastic case.
    • IP30 design
    • Pass LPS
    • Suitable for LED lighting and moving sign applications.
    • Low cost, high reliability
    • 100% full load burn-in test.
    • 2 years warranty
    • For professional use only.
    • This device must be installed by a qualified person.
    Specifications:
    • Output:
      • DC voltage: 24 V
      • Rated current: 1.5 A
      • Current range: 0 - 1.5 A
      • Rated power: 36 W
      • Ripple & noise (max): 180 mVp-p
      • Voltage tolerance: +/- 5.0%
      • Lie regulation: +/- 1.0%
      • Load regulation: +/- 2.0%
      • Setup, rise time: 1500 ms, 40 ms / 230 VAC 1500 ms, 40 ms / 115 VAC at full load
      • Hold-up time (typ.): 20 ms / 230 VAC 12 ms / 115 VAC at full load
    • Input:
      • Voltage range: 90-264 VAC 127-370 VDC
      • Frequency range: 47-63 Hz
      • Efficiency (typ.): 84 %
      • AC current (typ.): 0.5A / 230 VAC 0.75 A / 115 VAC
      • Inrush current (max.): cold start 45 A (twidth = 440 µs measured at 50% lpeak) at 230 VAC
      • Leakage current: 0.25 mA / 240 VAC
    • Protection:
      • Overload:
        • 110-160% rated output power
        • Protection type: hiccup mode, recovers automatically after fault condition is removed
      • Overvoltage:
        • 27~32.4V
        • Protection type: shut down output voltage, re-power on to recover
    • Environment:
      • Working temperature: -30 °C to +70 °C
      • Working humidity: 20 - 90% RH non-condensing
      • Storage temperature, humidity: -40°C ~ +80 °C, 10 ~ 95% RH
      • Temperature coefficient: +/- 0.03 % / °C (0 ~ 50 °C)
      • Vibration: 10 - 500 Hz, 2 G 10 min. / 1 cycle, period for 60 min. each along X, Y, Z axes
    • Safety & EMC:
      • Safety standards: UL8750, CSA-C22.2 No. 250.0-13 approved; design refer to EN60950-1
      • Withstand voltage: input-output: 3000 VAC
      • Solation resistance: input-output: > 100 MOhm; / 500 VDC / 25 °C / 70 % RH
      • EMC emission: compliance to EN55022, EN61000-3-2 Class A, EN61000-3-3
      • EMC immunity: compliance to EN55024, EN61000-4-2,3,4,5,6,8,11; light industry level (surge 2KV), criteria A
    • Other:
      • MTBF: 692.800 hrs min. MIL-HDBK-217F (25°C)
      • Dimensions: 84 x 57 x 29.5 mm
Quantity
Back to Products