PRODUCT NAME:

ITE SWITCHING POWER SUPPLY - SINGLE OUTPUT - 15 W - 24 V - CLOSED FRAME

ART NO:

RS-15-24

Description:

• Universal AC input / full range
• Cooling: by free air convection
• LED indicator for power on
• 100 % full load burn-in test
• Using 105 °C long life electrolytic capacitors
• Withstands 300 VAC surge input for 5 seconds
• High operating temperature up to 70 °C
• Withstands 5G vibration test
• No load power consumption < 0.5 W
• High efficiency, long life and high reliability.
• 3 years warranty
• Protection against: short circuit / overload / overvoltage
• For professional use only.
• This device must be installed by a qualified person.

• Output:
  • DC voltage: 24 V
  • Rated current: 0.625 A
  • Current range: 0-0.625 A
  • Rated power: 15 W
  • Ripple & noise (max.): 120 mVp-p
  • Voltage adj. range: 22-27.6 V
  • Voltage tolerance: ± 1.0 %
  • Line regulation: ± 0.5 %
  • Load regulation: ± 0.5 %
  • Setup, rise time:
    • 1000 ms, 30 ms / 230 VAC
    • 1000 ms, 30 ms / 115 VAC at full load
  • Hold up time (typ.):
    • 70 ms / 230 VAC
    • 12 ms / 115 VAC at full load
• Input:
  • Voltage range:
    • 85-264 VAC
    • 120-370 VDC
  • Frequency range: 47-63 Hz
  • Efficiency (typ.): 82 %
  • AC current (typ.):
    • 0.35 A / 115 VAC
    • 0.25 A / 230 VAC
  • Inrush current (typ.): cold start 65 A / 240 VAC
  • Leakage current: < 2 mA / 240 VAC
• Protection:
  • Overload:
    • Above 105 % rated output power
    • Protection type: hiccup mode, recovers automatically after fault condition is removed.
  • Overvoltage:
    • 28.4-32.4 V
    • Protection type: shuts off output voltage, clamping by zener diode.
  • Overheating:
    • U1 Tj 140 °C typically (U1) detection on main control IC
    • Protection type: shuts off output voltage, recovers automaticallly after temperature goes down.
• Environment:
  • Operating temperature: -25 to +70 °C
  • Operating humidity: 20-90 % RH non-condensing
  • Storage: -40 to +85 °C, 10-95 % RH
  • Temperature coefficient: ± 0.03 %/°C (0-50 °C)
  • Vibration: 10-500 Hz, 5G 10 min/1 cycle, period for 60 min each along X, Y, Z axes
• Safety & EMC:
  • Safety standards: UL60950-1, TÜV EN60950-1 approved
  • Withstand voltage:
    • Input to output: 3 kVAC
    • Input to ground: 2 kVAC
    • Output to ground: 0.5 kVAC
  • Isolation resistance: input to output, input to ground, output to ground: 100 Mohm / 500 VDC / 25 °C / 70 % RH
  • EMC emission: compliance to EN55022 (CISPR22) Class B; EN61000-3-2,-3
  • EMC immunity: compliance to EN61000-4-2,3,4,5,6,8,11; EN61000-6-2 (EN50082-2), heavy industry level, criteria A
• Other:
  • MTBF: min. 1,608,800 h, MIL-HDBK-217F (25 °C)
  • Dimensions: 62.5 x 51 x 28 mm.
  • Weight: 0.13 kg.