DIN-RAIL SWITCHING MODE POWER SUPPLY 24 V 2.5 A

  • PRODUCT NAME:

  • DIN-RAIL SWITCHING MODE POWER SUPPLY 24 V 2.5 A

  • ART NO:

  • DR-60-24

  • Description:

  • Features:
    • Universal AC input / full range
    • Protections: short circuit / overload / over voltage
    • Cooling by free air convection
    • Can be installed on DIN rail TS-35/7.5 or 15
    • UL508 (industrial control equipment) approved
    • Isolation class II
    • LED indicator for power on
    • 100 % full load burn-in test
    • 3 years warranty
    • For professional use only.
    • This device must be installed by a qualified person.
    Specifications:
    • Output:
      • DC voltage: 24 V
      • Rated current: 2.5 A
      • Current range: 0 - 2.5 A
      • Rated power: 60 W
      • Ripple & noise : 150 mVp-p
      • Voltage adjustment range: 21.6 - 26.4 V
      • Voltage tolerance: ± 1.0 %
      • Line regulation: ± 1.0 %
      • Load regulation: ± 1.0 %
      • Setup, rise time: 100 ms, 30 ms / 230 VAC 200 ms, 30 ms / 115 VAC at full load
      • Hold up time: 100 ms / 230 VAC 23 ms / 115 VAC at full load
    • Input:
      • Voltage range: 88 - 264 VAC 124 - 370 VDC
      • Frequency range: 47 - 63 Hz
      • Efficiency: 84 %
      • AC current: 1.2 A / 115 VAC 0.8 A / 230 VAC
      • Inrush current: cold start 18 A / 115 VAC 36 A / 230 VAC
    • Protection:
      • Overload:
        • 105 - 160 % rated output power
        • Protection type: constant current limiting, recovers automatically after fault condition is removed.
      • Overvoltage:
        • 27.6 - 32.4 V
        • Protection type: shutdown output voltage, re-power on to recover.
    • Environment:
      • Working temperature: -20 to +60 °C
      • Working humidity: 20 - 90 % RH non-condensing
      • Storage temperature, humidity: -40 to +85 °C, 10 - 95% RH
      • Temp coefficient: ± 0.03 % / °C (0 - 50 °C)
      • Vibration : 10 - 500 Hz, 2 G 10 min. / 1 cycle, period for 60 min. each along X, Y, Z axes; mounting: Compliance to IEC60068-2-6
    • Safety & EMC:
      • Safety standards: UL60950-1, TUV EN60950-1 approved, design refer to EN50178
      • Withstand voltage: input - output: 3 KVAC
      • Isolation resistance: input - output: 100 M ohm / 500 VDC / 25 / 70 % RH
      • Emc emission: compliance to EN55011, EN55022 (CISPR22) class B, EN61000-3-2 , -3
      • Emc immunity: compliance to EN61000-4-2, 3, 4, 5, 6, 8, 11, EN55024, EN61000-6-2, EN61204-3, heavy industry level, criteria A
    • Others:
      • MTBF: min. 216,200 h, MIL-HDBK-217F (25 °C )
      • Dimensions: 78 x 93 x 56 mm
      • Packing: 0.3 kg; 48 pcs / 15.4 kg / 1.02 ft³
Quantity
Back to Products