240W Single Output Industrial DIN RAIL Power Supply 24V - 10A

  • PRODUCT NAME:

  • 240W Single Output Industrial DIN RAIL Power Supply 24V - 10A

  • ART NO:

  • DRP-240-24

  • Description:

  • Features:
    • Universal AC input / Full range
    • Built-in active PFC function
    • Protections: Short circuit / Overload / Over voltage / Over temperature
    • Cooling by free air convection
    • Can be installed on DIN rail TS-35/7.5 or 15
    • UL 508(industrial control equipment)approved
    • LED indicator for power on
    • 100% full load burn-in test
    • Fixed switching frequency at 100KHz
    • 3 years warranty
    • For professional use only.
    • This device must be installed by a qualified person.
    Specifications:
    • Output:
      • DC voltage: 24V
      • Rated current: 10A
      • Current range: 0 ~ 10A
      • Rated power: 240W
      • Ripple & noise (max.) Note.2: 80mVp-p
      • Voltage adj. range: 24 ~ 28V
      • Voltage tolerance note.3: ±1.0%
      • Line regulation: ±0.5%
      • Load regulation: ±1.0%
      • Setup, rise time: 800ms, 40ms/230VAC 800ms, 40ms/115VAC at full load
      • Hold up time (typ.): 24ms/230VAC 24ms/115VAC at full load
    • Input:
      • Voltage range: 85-264VAC; 120-370VDC
      • Frequency range: 47 ~ 63Hz
      • Power factor (typ.): 0.96/230VAC 0.99/115VAC at full load
      • Efficiency (typ.): 84%
      • AC current (typ.): 2.8A/115VAC 1.4A/230VAC
      • Inrush current (typ.): cold start 27A/115VAC 45A/230VAC
      • Leakage current: <3.5mA / 240VAC
    • Protection:
      • Overload:
        • 105 ~ 150% rated output power
        • Protection type: Constant current limiting, recovers automatically after fault condition is removed
      • Over voltage:
        • 30 ~ 36V
        • Protection type: Shut down o/p voltage, re-power on to recover
      • Over temperature:
        • 100°C ±5°C (TSW1)detect on the heat sink of the power transistor
        • Protection type: Shut down o/p voltage, recovers automatically after temperature goes down
    • Environment:
      • Working temperature: -10 ~ +70°C (Refer to "Derating Curve")
      • Working humidity: 20 ~ 90% RH non-condensing
      • Storage temp., humidity: -20 ~ +85°C , 10 ~ 95% RH
      • Temp. Coefficient: ±0.03%/ (0 ~ 50°C)
      • Vibration: 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes; Mounting: Compliance to IEC60068-2-6
    • Safety & EMC (Note 4):
      • Safety standards: UL508, UL60950-1, TUV EN60950-1 approved
      • Withstand voltage: I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
      • Isolation resistance: I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC
      • EMC emission: Compliance to EN55011,EN55022 (CISPR22) Class B, EN61000-3-2,-3
      • EMC immunity: Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, EN61000-6-2 (EN50082-2), heavy industry level, criteria A
    • Others:
      • MTBF: 289.9Khrs min. MIL-HDBK-217F (25°C )
      • Dimensions: 125.5 x 125.2 x 100mm
      • Packing: 1.2Kg; 12pcs/15.5Kg/1.29CUFT